WebFBP-914 is applied by immersion, spray, or wipe on. It is approved for ultra high sensitivity aerospace applications. FBP-914 is listed on the Qualified Products List for AMS-2644E. It meets the requirements of AMS-2647C, ASME Boiler and Pressure Vessel Code, ASTM E-165, and ASTM E-1417, and for penetrant inspection materials. WebThey also, perform non-destructive testing ("NDT") on products using fluorescent penetrant inspection as required to conform to customer and/or national standards, by performing the following duties. Essential Responsibilities: * Perform Fluorescent Penetrant Inspections in a production environment. * Run part(s) through the NDT system.
Dye Penetration Test: Definition, Principles ... - What is …
WebJul 18, 2024 · Fluorescent penetrants will begin to lose their fluorescence at around 200˚F (93˚C), one of the reasons dryer temperatures are not to exceed 160˚F (71˚C) per ASTM E-1417¶6.6.2. For test temperatures 150˚F (65˚C) to roughly 350˚F (176˚C) special high temperature penetrants are available, relying on visible dyes. WebFluorescent penetrants are generally more capable of producing a detectable indication from a small defect. Also, the human eye is more sensitive to a light indication on a dark background and the eye is naturally drawn to a fluorescent indication. how to sew a mug cozy
Titanium Line Operator / LPC-T / Dept 860 (Portland, OR)
WebFLUORESCENT LIQUID PENETRANT TESTING PROCEDURE. Liquid penetrant testing is one of the oldest non-destructive testing methods, and it is also one of the most effective. Fluorescent dye penetrant testing standards vary, but for the most part incorporate a similar inspection procedure. Fluorescent penetrant inspection (FPI) is a type of dye penetrant inspection in which a fluorescent dye is applied to the surface of a non-porous material in order to detect defects that may compromise the integrity or quality of the part in question. FPI is noted for its low cost and simple process, and … See more There are many types of dye used in penetrant inspections. FPI operations use a dye much more sensitive to smaller flaws than penetrants used in other DPI procedures. This is because of the nature of the See more There are six main steps in a fluorescent penetrant inspection process: Step 1: Initial cleaning Before the penetrant can be applied to the surface of the material in question one must ensure that the surface is free of any contamination such as See more • The method requires thorough cleaning of the inspected items. Inadequate cleaning may prevent detection of discontinuities. • Test materials can be damaged if compatibility is not … See more • Highly sensitive fluorescent penetrant is ideal for even the smallest imperfections • Low cost and potentially high-volume • Suitable for inspection of non-magnetic materials and electrical insulators. See more • Manufacturing Processes Reference Guide, Industrial Press Inc. 1994 • Tech Results • ASTM E 1417 Standard practice for liquid penetrant examination • ISO 3452-1 Non-destructive testing - Penetrant testing - Part 1: General principles See more WebLiquid penetrant inspection is a nondestructive testing method that reveals surface breaking flaws by bleedout of a penetrating liquid colored with a visible or fluorescent dye from the flaw. The technique is based … how to sew a mitered quilt binding corner